In the electric arc furnace, the heat is generated by an electric arc. In this furnace, the arc may be created by the following different ways:
1. By striking the arc between the charge and electrode: In this method, the heat is directly conducted and taken by the charge. The furnace operating on this principle is known as direct arc furnace. These furnaces are used for production and refining of various grades of steel.
2. By striking the arc between two electrodes: In this method, the heat is transferred to the charge by radiations. The furnace operating on this principle is known as indirect arc furnace. These are used for the melting of non-ferrous metals such as brass, copper, and zinc.
There are two types of arc furnaces, namely:
- Direct Electric Arc Furnace
- Indirect Electric Arc Furnace
Direct Electric Arc Furnace Working
The diagram shows a direct electric arc furnace. The chamber of the furnace is lined with refractory material. The arc is struck between the electrode and the charge. Three electrodes made of carbon or graphite are projected from the top of the furnace, and three-phase supply is given.
The current passes through them via the charge. Since the arc is in direct contact with the charge, so it is possible to produce the highest temperatures by direct electric arc furnace. As the arc passes through the charge, it will produce automatic stirring action.
The arc has a negative resistance characteristic i.e.; resistance falls with the increase in temperature. Thus some current limiting device is required in the circuit to prevent short circuits. It may be in the form of a reactor. The direct arc furnace is very commonly used for the production of steel.
There is a charging door from where the charge is supplied. And also there is an outlet for molten metal. The usual size of the direct electric arc furnace is 5 to 10 tons capacity. For melting 1 ton of steel, 1000 units of energy are consumed.
Indirect Arc Furnace Working
The figure shows an indirect arc furnace. In this furnace, the arc is formed between the two electrodes. And heat so produced is transmitted to the charge by radiation. The temperature is lower than the direct arc furnace. So indirect arc furnaces are suitable for melting metals having lower melting points e.g., non-ferrous metals such as brass, copper, zinc, etc.
The arc is struck between the electrodes, so only two electrodes are required. The supply is, therefore, a single phase. Since during the process of heating, the electrodes are consumed, so the feeding of electrodes to the indirect arc furnace is automatic.
The furnace is cylindrical. Since the arc does not come in contact with the charge, so the automatic stirring action, which is present in the direct arc furnace, is absent. The furnace may be equipped with automatic rocking equipment. The power factor varies from 0.7 to 0.8. The electrode material and electrical equipment of indirect-arc furnace are similar to that used for direct arc furnace.
Submerged Arc Furnace Working
This furnace is used for the manufacture of ferrochrome and ferromanganese. In submerged arc furnace, the electrodes project down into the charge remains immersed in it, as shown in the diagram. The power factor is about 0.8.
The heat is produced due to the resistance offered by the charge to the flow of current. Moreover, power is controlled by varying the distance between electrodes or by varying applied voltage to the electrodes.
Power Supply for Electric Arc Furnace
The power consumption of the arc furnaces is very high. The arc voltage is low i.e., between 50-150 V, but the current requirement is of the order of several hundred amperes. As the heating effect is proportional to the square of the current; therefore, a high current is essential to achieve high temperatures. A 3-phase arc furnace transformer is used to obtain the required power supply.
Thanks for reading about the “electric arc furnace working principle”. For more information visit Wikipedia.
Thank you for the detailed explanation of electric arc furnaces and their operations! Understanding the differences between direct and indirect arc furnaces, as well as their specific applications, is incredibly helpful. Your breakdown of how each type works and their ideal uses for different metals provides valuable insights for anyone in the industry. Appreciate the informative and concise overview!
Absolutely! “I’m truly grateful for the advancements in Electric Arc Furnace and arc heating technologies. Their efficiency and precision not only enhance steel production but also contribute to more sustainable manufacturing practices. It’s incredible how these innovations are shaping the future of metallurgy!”
We are very thankful to our readers.